设为荣鼎娱乐 设为收藏

联系方式

 

洛阳松导感应加热科技荣鼎娱乐 

联系方式:15038554363  

24小时技术热线:15038554363

电 话:0379—60125771

邮 箱:1390003299@qq.com

厂址:河南省洛阳市洛新工业园区

  • 产品
  • 0.25T并联中频炉

    0.5T中频炉

    0.5T并联中频炉

    0.5T串联中频炉

    0.5T 中频熔炉

    0.25T中频熔炉

    1T中频熔炉

    2T中频熔炉

    5T中频熔炉

    中频熔炉

    中频感应炉

    250kg中频感应炉

    500kg中频感应炉

    1T中频感应炉

    2T中频感应炉

    5T中频感应炉

    3T中频感应炉

    400kW全自动中频感应加热炉

    棒料,圆钢中频感应加热设备

    中频钨钼烧结炉

    中频感应烧结炉

    钼丝钼块烧结炉

    钢管感应加热炉

    钢管感应加热炉

    Φ120mm圆钢感应加热炉

    350kW铝圆棒自动加热生产线

    Φ65mm圆钢中频锻造炉

    300KW中频感应加热设备

  • 名称:5T中频熔炉
    价格:0

  • 分享到:
    产品描述

        
    5T中频熔炉
     

    5T  中频熔炉主要用于黑色金属的熔炼。例如,钢,球墨铸铁,灰口铁,钢合金,铁合金等也可以用于有色金属如铜和铝的熔炼。

    一,中频熔炉基本组成 

    3 000kw  中频电源(并联逆变器 )  ,谐振电容器组, 600mm2  水冷电缆, 5T  炉体(钢或铝)

     快速中频熔炼炉,标准功率配置为 3000 KW / 500HZ  ,大功率配置为 35 00KW / 500HZ  ,进线电压为 660V  ,中频电源输出电压为 1500V  。 

     IF电源的设计易于使用,并具有完善的保护措施,例如过流,过压,缺相,欠压和水温高。 

     中频熔炉炉体厚度可达 20mm  ,结构牢固,铜管壁厚 5mm  ,经过多层绝缘处理后稳定可靠。 

     中频熔炉的所有水管均采用不锈钢管制成,避免生锈和结垢,冷却效果大大提高。 

     。节能,合理的设计和环保要求。 

     。中频熔炉主要用于铸造企业和冶金行业。 

    1563796957413019.png

    B,中频电源技术特点和性能  

    如图1所示,全数字频率电源控制电路263,控制芯片规模的集成电路连接简单,电源稳定,可靠,故障率低。目前,它是六代主控板 DU        

     ,IF电源具有恒定的功率输出,输出将不会影响输出功率当负载变化时,可节约超过 10% 比普通IF设备。  

     ,中频电源保护功能完善,具有电流和电压双闭环调节系统,具有过电压,过电流,电流限制,电压限制,设备停电和欠压和直通保护,水压不足,缺平等保护。

     ,具有故障自诊断功能,设备维修方便,简单。

    5.  中频电源是扫频型零电压软启动,谐振频率是自跟踪的。

     ,强大的启动性能和负载适应性,可在轻,重负载下频繁启动,启动成功率为 100%  

    7.  阻抗调节器会自动适应负载变化,因此设备参数始终以最佳状态运行。

    8.  启动方式为扫频式零压力软启动,对回路无影响。

     ,中频熔炉设备在正常情况下失效时不会损坏组件。 

    C,炉体介绍壳结构分为两种结构:铝壳钢壳炉体小容量炉壳一般是由铝合金制成,其具有结构合理,体积小,安装方便,维修简单以及维护成本低。大容量炉体壳体采用钢架结构,炉体结构由炉体固定架和炉体组成,炉体固定架和炉体采用整体骨架结构。  
            
     
     炉体的倾斜由液压系统控制,该液压系统是通过抬起炉体两侧的两个液压缸来实现的。炉体的复位是通过炉体自重产生的压力实现的。F,铁炉体有一个内置的轭铁,轭铁护罩可以减少漏磁通,防止炉体发热并提高效率。同时,轭架用作固定感应线圈的支撑件,从而炉体实现了高强度和低噪音。 
      
      轭是由冷轧硅钢板和不锈钢夹板制成的月牙形轭。铁芯与线圈的接合面是圆弧面,按压部是过去的线而不是线的面。好,漏磁少。堆叠硅钢板后,用专用夹板而不是专用螺纹螺钉将其拧紧 。 这种结构可以充分利用硅钢板的导磁面积 并  减少局部发热的可能性。G,线圈感应线圈的线圈是所述心脏的的中频熔化炉  
         
        感应线圈在电流的作用下会产生强磁场,这会导致炉子中的金属产生涡流并产生热量。线圈是将电能转化为热量的关键,因此线圈的设计非常重要。该炉的线圈与中频熔炉的实际使用相结合根据电磁场原理,通过计算机专业软件的计算确定较好的解决方案,感应线圈的设计功率与实际运行功率之间的误差不大于 5      特别地,匝间绝缘通过先进的绝缘方法来保护,并且特殊的夹持技术可以有效地减小线圈的轴向振动。感应线圈的内壁涂有进口高温绝缘材料,并配有泄漏报警系统,可以有效地防止炉子磨损。可选的炉衬和顶出机构可以快速去除损坏的炉衬,并有助于快速建造炉子。  

     

     

    5T intermediate frequency melting furnace
     

    5T intermediate frequency melting furnace is mainly used for the smelting of ferrous metals。 For example, steel, ductile iron, gray iron, steel alloy, iron alloy, etc。 can also be used for the smelting of non-ferrous metals such as copper and aluminum。

    A, the basic composition of the intermediate frequency melting furnace

    3 000kw intermediate frequency power supply (parallel inverter ) , resonant capacitor bank, 600mm2 water-cooled cable, 5T furnace body (steel or aluminum)

    . Fast medium frequency melting furnace, standard power configuration is 3000 KW/500HZ , high power configuration is 35 00KW/500HZ , incoming line voltage is 660V , and intermediate frequency power supply output voltage is 1500V 。

    。 The design of the IF power supply is user-friendly, with perfect protection measures such as overcurrent, overvoltage, phase loss, undervoltage, and high water temperature.

    . The thickness of the medium-frequency melting furnace body is up to 20mm , the structure is firm, the wall thickness of the copper tube is 5mm , and it is stable and reliable after multi-layer insulation treatment.

    。 All water pipes of the medium frequency melting furnace are made of stainless steel pipes to avoid rust and scale, and the cooling effect is greatly improved。

    。 Energy saving, reasonable design and environmental protection requirements.

    . The intermediate frequency melting furnace is mainly used in foundry enterprises and metallurgical industries.

    image.png

    B, IF power supply technology features and performance :

    1, all-digital frequency power supply control circuit 263, a control chip scale integrated circuit connection is simple, the power supply is stable, reliable, low failure rate. Currently, it is the six-generation main control board of DU 。

    , IF power supply has a constant power output, the output will not affect the output power when the load changes, can save more than 10% than ordinary IF equipment .

    , IF power protection function is perfect, with current and voltage double closed-loop regulation system, with over voltage, over current, current limit, voltage limit, equipment power failure and under voltage and straight through protection, water pressure shortage, lack of equal protection.

    , with fault self-diagnosis function, equipment maintenance is convenient and simple.

    5。 The intermediate frequency power supply is a sweep-type zero-voltage soft start, and the resonant frequency is self-tracking.

    , strong starting performance and load adaptability, can be started frequently under light and heavy load, the startup success rate is 100% .

    7. The impedance regulator automatically adapts to the load change, so that the equipment parameters are always running at the optimum state.

    8。 The starting mode is swept-type zero-pressure soft start, which has no impact on the loop。

    , The intermediate frequency melting furnace equipment will not damage the components when it fails under normal conditions.

    C, furnace body introduction 
    The shell structure is divided into two structures: aluminum shell furnace and steel shell furnace body : 
    The small-capacity furnace shell is generally made of aluminum alloy, which has reasonable structure, small volume, convenient installation, simple maintenance and low maintenance cost. 
    The large-capacity furnace body shell adopts a steel frame structure, and the furnace body structure is composed of a furnace fixing frame and a furnace body, and the furnace fixing frame and the furnace body adopt an integral skeleton structure. The tilting of the furnace body is controlled by the hydraulic system, which is realized by lifting two hydraulic cylinders on both sides of the furnace body. The resetting of the furnace body is realized by the pressure generated by the self-weight of the furnace body. 
    F, yoke 
    The furnace body has a built-in yoke, and the yoke shield can reduce the magnetic flux leakage, prevent the furnace body from heating and improve the efficiency。 At the same time, the yoke acts as a support for fixing the induction coil, so that the furnace body achieves high strength and low noise. The yoke is a crescent-shaped yoke made of cold-rolled silicon steel sheet and stainless steel splint. The joint surface of the iron core and the coil is a circular arc surface, and the pressing portion is a surface instead of a line in the past. Good, less magnetic leakage. After the silicon steel sheets are stacked, they are tightened with a special splint instead of a special threaded screw 。 This structure can make full use of the magnetic conductive area of the silicon steel sheet and reduce the possibility of local heat generation。 
    G, coil ( induction coil ) 
    The coil is the heart of the intermediate frequency melting furnace 。 The induction coil generates a strong magnetic field under the action of current, which causes the metal in the furnace to generate eddy currents and generate heat。 Coils are the key to converting electrical energy into heat, so the design of the coil is very important。 The coil of the furnace is combined with the actual use of the intermediate frequency melting furnace . According to the principle of electromagnetic field, the better solution determined by the calculation of computer professional software, the error between the design power of the induction coil and the actual running power is not more than 5 %, and the insulation of the coil In particular, the inter-turn insulation is protected by an advanced insulation method, and the special clamping technology can effectively reduce the axial vibration of the coil。 The inner wall of the induction coil is coated with imported high-temperature insulation material, and is equipped with a leak alarm system, which can effectively prevent the furnace from being worn。 

    Optional furnace lining and ejection mechanism can quickly remove the damaged lining and facilitate the rapid furnace construction.



     

     

    以下为版全声明 博达

    Copyright© 2007-2013洛阳松导感应加热科技荣鼎娱乐 All Rights Reserved 
    电 话:0379—60125771 手 机:15038554363
    网站正在制作中,随时修改,非正式运行。
    本站关键词:中频炉、中频电炉、熔炼炉
    三分快3 极速飞艇平台 上海11选5 九度彩票 159彩票 新疆喜乐彩走势图 北京两步彩 上海时时乐 极速11选5 乐彩网导航

    三分快3 极速飞艇平台 上海11选5 九度彩票 159彩票 新疆喜乐彩走势图 北京两步彩 上海时时乐 极速11选5 乐彩网导航